[. . . ] Earphone module with integrated neck strap If your player is being used for the first time or if it has not been charged for a long time, make sure player is charged fully before using it · To charge iAUDIO T2, connect the player to a PC using a USB cable or connect to the AC provided adapter only. Once connected, the player will automatically turn on and start charging iii. [. . . ] You can copy any files including MP 3files to and from "iAUDIO" Drive icon on the windows tray. To disconnect the player from the PC, first make sure that file transfers are complete and then, single-click on 7. When "Safely Remove Hardware" message appears, and the OLED displays a battery you may disconnect the USB cable. - If iAUDIO drive does not appear in either My Computer or Windows Explorer, check the connection and settings, and then re-connect (Separate driver installation is required for Windows 98). - If the USB cable is connected after running `Safely Remove Hardware' wizard from the steps listed above, the player stays in the battery-charging mode. To access its memory, iAUDIO must be disconnected first and reconnected. - If the device is connected through a USB HUB, the device won't be charged. Instead, close the JetShell after file transfers have been completed, after which the player can be disconnected safely from the PC. - If the following message appears, run Safely Remove Hardware after a few minutes. after the splash screen and logo is displayed , the standby screen appears. Pressing the buttons allows selection of previous and next tracks as well as fast forward and rewind the current track. To turn off the player, press the button and hold it until shutdown starts. [. . . ] Earphone module with integrated neck strap Earphone module with integrated neck strap Earphone module with integrated neck strap För att ladda iAUDIO T2, anslut spelaren med USB-kabel till en dator eller anslut enbart till en växelströmsadapter. Flyttar uppåt i mappstrukturen Öppnar en mapp Spelar en fil Öppnar en mapp Flyttar markören uppåt Växlar till lägesväljaren Öppnar popup Flyttar markören nedåt Flyttar markören uppåt Växlar till lägesväljaren Flyttar markören nedåt Flyttar till vänster Väljer läget Flyttar till vänster Flyttar till vänster Växlar till initialt läge Flyttar till höger [. . . ]